$55.00 – $65.00
3D printed Bronco rear panel sub grill.
This grill is for NON-B&O Broncos that have the cubby installed on the rear panel.
It will require you to remove the cubby from the panel to use our grill.
You will need to remove the cubby from your panel. Remove ONLY the cubby, no need to cut the extra material from the panel’s cubby lip.
The best way to remove the cubby is to use a Forstner drill bit. You need to cut slowly on the welded plastic area.
| Weight | 0.9 lbs |
|---|---|
| Dimensions | 10 × 4 × 1 in |
| Grill Covering | No Grill Mesh, Grill Mesh |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.